How to Clean a Humidifier

A humidifier only helps your air if the water inside it is clean. Standing water grows bacteria, pink film, and mineral crust surprisingly fast — but keeping it clean takes just a couple of minutes a day and one proper deep clean a week. This hub walks you through exactly what to do, for every type and brand.

The simple rhythm that keeps a humidifier clean

Almost every manufacturer — and the EPA's guidance on humidifier care — lands on the same pattern. Learn these three habits and you will prevent nearly every mold, smell, and buildup problem before it starts.

Daily

Empty, rinse, refill

Dump leftover water every morning, rinse the tank, wipe it dry, and refill with fresh water. Never just "top off" yesterday's water.

Weekly

Deep clean & descale

Once a week, soak the tank and base in white vinegar to dissolve mineral scale and kill the film that rinsing can't remove.

Monthly

Disinfect & inspect

Disinfect with a diluted hydrogen peroxide or bleach solution, check filters and wicks, and replace anything that stays slimy or stained.

Humidifier Care Checker

Answer three quick questions and get a cleaning plan matched to your machine — what to do today, and how often to do it from now on.

1. What type of humidifier do you have?
2. When did you last deep clean it?
3. Do you see or smell anything in the tank or base?

Please answer all three questions so we can build your plan.

Guides

Straightforward, step-by-step help for the jobs humidifier owners actually search for — no filler, no guesswork.

How to Clean a Humidifier

The complete routine: daily rinsing, the weekly vinegar deep clean, disinfecting, proper drying, and the products you should never use.

Read the guide →

Pink Mold in a Humidifier

That pink or orange slime isn't actually mold — here's what it really is, whether it's dangerous, how to remove it, and how to stop it returning.

Read the guide →

How to Descale a Humidifier

White crust, chalky flakes, and "white dust" all come from hard-water minerals. Vinegar and citric acid methods, plus filter care, explained.

Read the guide →

How Often to Clean & Cleaning by Brand

A realistic schedule for every type, plus the specifics for cool mist models, Vicks vaporizers, Crane humidifiers, and ultrasonic units.

Read the guide →

Why a dirty humidifier is worse than no humidifier

A humidifier's whole job is to push moisture into the air you breathe. Whatever is living or crusting inside the tank — bacteria, mold spores, dissolved minerals — can ride that moisture straight into the room. That's why a neglected unit can cause musty smells, white dust on furniture, irritated sinuses, and, in the case of heavily contaminated ultrasonic models, a flu-like reaction sometimes called "humidifier fever." The fix is not buying a fancier machine. It's a two-minute daily habit and one weekly soak, which is exactly what this site teaches. Start with the complete cleaning guide, and if you've spotted pink slime, go straight to the pink mold guide.

Home › Guides › How to Clean a Humidifier

How to Clean a Humidifier: The Complete Step-by-Step Guide

Everything your humidifier needs, in the right order: the two-minute daily rinse, the weekly vinegar deep clean, monthly disinfecting, and the mistakes that quietly ruin machines.

Cleaning a humidifier is not complicated, but it does have to be consistent. A humidifier holds standing water at room temperature — close to a perfect incubator for bacteria and mold — and then blows the results into your bedroom. The good news is that the routine below takes about two minutes a day plus fifteen minutes once a week, and it works for cool mist, warm mist, ultrasonic, and evaporative models alike. Where a step differs by type, we note it; for type-specific schedules, see our guide to how often to clean a humidifier.

What you'll need

  • Distilled white vinegar (5% acidity) — the workhorse for descaling and routine cleaning
  • A soft bottle brush or old soft toothbrush for corners and caps
  • Soft cloths or paper towels
  • Hydrogen peroxide (3%) or unscented household bleach for disinfecting
  • Citric acid powder (optional, for heavy scale — see the descaling guide)
  • Distilled or demineralized water for refilling, especially if your tap water is hard

That's the whole kit. You do not need specialty humidifier cleaning products, fish-tank tablets, or scented additives — most of those are unnecessary, and some actively damage the machine or the air.

Step 1: The daily rinse (2 minutes)

Every morning — or every time the tank runs low — do this:

  1. Turn the unit off and unplug it.
  2. Remove the tank and pour out all the remaining water. Never top off old water with new; that's how a day-old tank becomes a week-old culture.
  3. Rinse the tank with fresh tap water, swishing it around the walls and the cap.
  4. Wipe the inside of the tank and the base reservoir with a clean cloth, and shake out excess water.
  5. Refill with fresh water — distilled if you can, to prevent mineral buildup — and reassemble.

On days you won't run the humidifier, leave the tank empty, the cap off, and the parts separated so everything air-dries. Mold needs moisture; a dry machine is a hostile machine.

Step 2: The weekly deep clean with vinegar

Once a week during the season you use the humidifier, give it a proper deep clean. This is the step that removes the slippery biofilm and mineral scale a rinse can't touch.

  1. Unplug and disassemble. Separate the tank, cap, base, and any removable parts like filters or mist tubes, following your manual.
  2. Soak in vinegar. Pour undiluted white vinegar into the base reservoir so it covers the heating element (warm mist) or ultrasonic transducer and nebulizer (cool mist/ultrasonic). Fill the tank with a solution of 1 part vinegar to 1 part water, or straight vinegar for heavy buildup.
  3. Wait 20–30 minutes. Let the acid dissolve the scale and loosen the film. For thick crust, extend to an hour — see how to descale a humidifier for the heavy-duty method.
  4. Scrub gently. Use the bottle brush or toothbrush on corners, seams, the tank cap threads, and around the transducer disc. Scale should flake away easily; film should wipe off.
  5. Rinse thoroughly. Rinse every part under running water until the vinegar smell is gone. Vinegar residue left behind can be aerosolized on the next run, and you don't want to breathe it.
  6. Dry completely. Wipe parts with a clean cloth and let them air-dry fully before reassembling.
Evaporative models

Don't submerge the wick filter in vinegar for long soaks — rinse it separately and inspect it. A wick that stays stiff, discolored, or musty after cleaning needs replacing, not more soaking.

Step 3: Disinfecting (monthly, or after any mold)

Vinegar cleans and descales, but for a true disinfect — once a month, after illness in the house, after storage, or whenever you've found growth like pink mold in your humidifier — use one of these:

  • Hydrogen peroxide: Fill the tank and base with 3% hydrogen peroxide, let sit 30 minutes, then rinse very well.
  • Diluted bleach: Mix 1 teaspoon of unscented bleach per gallon of water. Soak parts for 20 minutes maximum, then rinse repeatedly until no bleach smell remains at all.

Never mix bleach and vinegar — together they create chlorine gas. Pick one method, rinse fully, and only then use the other another day if needed.

Step 4: Drying and storage

How you finish matters as much as how you wash. After every deep clean, dry each component separately with the tank cap off. Before storing the humidifier for the season, run the full deep clean and disinfect, dry everything for at least 24 hours, remove and discard (or thoroughly dry) the filter, and store the parts loosely assembled in a dry place. A machine put away damp will greet you in November with a smell no amount of vinegar will fully fix — at that point, replacing the tank or the whole unit is often the honest answer.

What never to use in or on a humidifier

  • Essential oils in the water tank (unless your model has a separate aroma tray). Oils degrade plastic and gunk up ultrasonic transducers.
  • Scented or antibacterial additives not approved by your manufacturer. If it isn't made for humidifiers, it isn't made for your lungs either.
  • Abrasive pads and harsh scouring powders on the transducer disc or heating plate — scratches give scale and biofilm a better grip.
  • Detergent left unrinsed. If you wash with dish soap, rinse until the water runs completely clear; soap residue foams and aerosolizes.
  • Hot water in a cool mist tank unless the manual allows it — it can warp plastic and grow bacteria faster.

Common mistakes to avoid

The patterns that lead to a slimy tank are almost always the same: topping off instead of refilling, cleaning "when it looks dirty" (biofilm is invisible before it's pink), using hard tap water in an ultrasonic unit (hello, white dust), and reassembling parts while they're still wet. If you're already seeing colored film, don't panic — head to our pink mold guide for the removal protocol, then come back to this routine so it doesn't return.

Home › Guides › Pink Mold in a Humidifier

Pink Mold in a Humidifier: What It Is, and How to Get Rid of It

That slimy pink or orange film in the tank isn't technically mold at all — but it still doesn't belong in the air you breathe. Here's what it is, how dangerous it really is, and the removal routine that actually works.

If you've found pink, salmon, or orange slime in your humidifier tank, you're not alone — "pink mold in humidifier" is one of the most common humidifier searches there is, because it shows up in almost every neglected tank eventually. It appears as a slippery film on the tank walls, around the cap, in the base reservoir, and sometimes on filters and bathroom grout nearby. Here's the reassuring part first: it's very common, it's removable, and with the routine below it doesn't have to come back.

What the pink film actually is

Despite the name, pink "mold" in a humidifier is usually not a mold at all. It's most often a bacterium called Serratia marcescens, which produces a reddish-pink pigment and thrives in damp places with trace nutrients — soap residue, minerals, and dust in tap water are plenty. It can also be pink yeast (Rhodotorula) or, occasionally, true pink-pigmented fungi. All three love the same conditions: standing water, warmth, and time. The film itself is a biofilm — a slimy protective layer the organisms build together — which is why pink growth feels slippery, clings to plastic, and laughs at a quick rinse.

You'll usually spot it first in the spots water sits longest: the bottom of the tank, inside the cap and its threads, the float and water channel in the base, and around the ultrasonic transducer. Orange or rusty-pink staining on a wick filter means the growth has moved into the filter too.

Is pink mold in a humidifier dangerous?

For most healthy adults, brief exposure is unlikely to cause serious illness — but it is not harmless, and it should never be ignored. Serratia marcescens is an opportunistic bacterium: it's associated with respiratory and urinary infections, particularly in people with weakened immune systems, infants, the elderly, and anyone with asthma or chronic lung conditions. The bigger everyday problem is that a humidifier aerosolizes whatever lives in its tank. A contaminated ultrasonic or cool mist unit can disperse bacteria and mold fragments through the room for hours, irritating airways and worsening allergies — the opposite of why you bought the machine. Treat any visible pink film as a stop sign: don't run the unit again until it has been cleaned and disinfected.

How to remove pink mold from a humidifier

  1. Unplug and empty. Pour out all water. Work in a ventilated area, and wear household gloves if the growth is heavy.
  2. Disassemble fully. Tank, cap, base parts, mist tube, float — everything that comes apart. Pink film hides in threads and seams.
  3. Scrub first, soak second. Using a bottle brush or old toothbrush with a little dish soap, physically scrub every surface. Biofilm must be broken mechanically; soaking alone won't lift it. Pay attention to the cap threads, tank corners, and the transducer area (gently — no abrasives on the disc).
  4. Soak in vinegar. Fill the tank and base with undiluted white vinegar and let everything sit for 30–60 minutes. This kills much of the growth and dissolves the mineral deposits the biofilm anchors to. For stubborn crust underneath the film, follow our descaling guide.
  5. Disinfect. Empty the vinegar, rinse, then disinfect with 3% hydrogen peroxide for 30 minutes, or a diluted bleach solution (1 teaspoon unscented bleach per gallon of water) for 20 minutes. Never combine bleach with vinegar residue — rinse thoroughly between steps.
  6. Rinse until neutral. Rinse every part repeatedly until there's no vinegar, peroxide, or bleach smell left.
  7. Dry completely. Air-dry all parts separately, cap off, for several hours. Reassembling a damp machine restarts the whole cycle.
  8. Deal with the filter honestly. If a wick or filter is pink-stained or smells musty after cleaning, replace it. Porous filters harbor growth deep inside where scrubbing can't reach.
When to replace instead

If pink film returns within a day or two of a full scrub-and-disinfect, or the plastic itself stays stained and slimy-feeling, the biofilm has colonized scratches and pores in the plastic. Replacement tanks are cheap for many models; if yours isn't available, replacing the unit is the safer call — especially in a baby's room.

How to stop pink mold coming back

Removal is the easy half; prevention is a routine, and it's the same routine from our main how to clean a humidifier guide:

  • Empty and rinse daily. Stagnant water is the whole problem. Dump, rinse, wipe, refill with fresh water every day you run it.
  • Deep clean weekly. The vinegar soak from step 4 above, once a week, prevents biofilm from ever establishing.
  • Use distilled water. It removes most of the minerals and trace nutrients the bacteria feed on, and prevents scale at the same time.
  • Dry on off days. If you don't run the humidifier daily, store the tank empty and open. A dry tank grows nothing.
  • Mind the room. A humidifier running in an already-humid room (above ~50% relative humidity) keeps its own parts wet longer. A cheap hygrometer helps you run it only when the air actually needs moisture.
  • Disinfect monthly. Even with perfect daily habits, a monthly peroxide or bleach disinfect resets the clock. See the full calendar in how often to clean a humidifier.

Follow that for two weeks and the pink film will be a memory. The organism needs water, time, and neglect — take away any one of the three and it simply can't establish itself.

Home › Guides › How to Descale a Humidifier

How to Descale a Humidifier: Removing Mineral Buildup and White Dust

White crust on the heating plate, chalky flakes in the tank, fine dust on the furniture — all of it is your water, not your machine failing. Here's how to dissolve it and how to keep it from forming.

If you run a humidifier on tap water, descaling isn't optional maintenance — it's the main event. Most US tap water carries dissolved calcium and magnesium, and every time water evaporates or gets blasted into mist, those minerals stay behind. The result is limescale: the hard white or gray crust that builds up on heating elements, ultrasonic transducers, tank walls, and caps. Left alone, scale makes warm mist units steam weakly, makes ultrasonic units mist poorly, feeds the biofilm behind problems like pink mold, and eventually kills the machine. The fix is a mild acid, a little patience, and a better water habit.

Signs your humidifier needs descaling

  • White, gray, or tan crusty deposits on the base, heating plate, or transducer disc
  • Chalky flakes floating in the tank or clogging the cap
  • Reduced mist output, or a warm mist unit that steams slowly
  • Fine white dust settling on furniture near an ultrasonic humidifier — that's airborne mineral residue from hard water, and a clear signal to switch water and descale
  • A gritty feel on tank walls even after rinsing

How fast this happens depends entirely on your water. In a hard-water city, visible scale can appear within a week of daily use; with soft water, you may go a month. The schedule in how often to clean a humidifier assumes average tap water — adjust toward weekly if your kettle furs up quickly, since your humidifier is doing the same thing.

Method 1: Descaling with white vinegar

Vinegar is the standard method — cheap, food-safe, and effective on light to moderate scale.

  1. Unplug the humidifier and empty all water from the tank and base.
  2. Pour undiluted white vinegar (5% acidity) into the base reservoir until it fully covers the heating element or transducer. For the tank, use straight vinegar for heavy scale, or a 1:1 vinegar-and-water mix for maintenance.
  3. Let it soak for 30 minutes. Thick crust may need 1–2 hours; you can gently warm the process on warm mist models by letting the vinegar sit in the (unplugged, cooling) reservoir after a run — never boil vinegar in the unit.
  4. Scrub softened deposits with a bottle brush or old soft toothbrush. The scale should flake or smear away without force. Never use metal tools or abrasive pads on the transducer disc or heating plate.
  5. Pour out the vinegar, rinse every part thoroughly until the smell is gone, wipe dry, and air-dry completely before refilling.

Method 2: Descaling with citric acid

For heavy, stubborn scale — or if you can't stand the vinegar smell — citric acid powder (sold for canning and descaling kettles) works even better and rinses odor-free.

  1. Dissolve 2–3 tablespoons of citric acid in a quart of warm water.
  2. Fill the base reservoir and tank with the solution, making sure scaled surfaces are submerged.
  3. Soak 30–60 minutes, then scrub gently, rinse thoroughly, and dry.

Citric acid is also the better choice for descaling inside narrow mist tubes and channels where a brush can't reach: just fill, wait, and flush. Whichever acid you use, use only one at a time and never mix it with bleach — disinfecting is a separate step, done after a full rinse, as described in our main cleaning guide.

Filter and wick care

Evaporative humidifiers push air through a wet wick filter, and that wick traps minerals with every gallon. A scaled wick gets stiff, stops wicking evenly, and develops a musty smell that cleaning can't fully remove. To extend its life:

  • Rinse the wick under cool water weekly; never wring or scrub it hard.
  • You can soak a mineral-crusted wick in the vinegar or citric acid solution for 30 minutes to soften deposits, then rinse until the water runs clear.
  • Let the wick air-dry completely once a week (many owners rotate two wicks) — this also slows mold.
  • Replace the wick when it stays stiff, discolored, or smelly after descaling — typically every 1–3 months of regular use. A dead wick, not the machine, is the usual cause of "my humidifier stopped working."

Demineralization cartridges and filter caps (common on ultrasonic models) are consumables too: once exhausted they stop trapping minerals, and white dust returns. Replace them on the manufacturer's schedule — usually every 30–60 days in hard water areas.

Preventing scale: the water matters most

Descaling treats the symptom; your water choice treats the cause. In rough order of effectiveness:

  • Distilled or demineralized water — the single best change. No minerals in means no scale and almost no white dust, and it starves biofilm too.
  • Filtered water — a pitcher filter reduces some minerals but doesn't remove all hardness; better than raw tap, not as good as distilled.
  • Daily emptying — minerals concentrate as water sits and evaporates; dumping and refilling daily (part of the routine in how to clean a humidifier) slows buildup noticeably.

A note for warm mist owners: boiling vaporizers leave minerals behind by design, so their reservoirs scale fastest of all and benefit most from weekly vinegar soaks. Ultrasonic owners see scale differently — as white dust in the room — so for you, switching to distilled water matters even more than soaking. Find your type's full schedule in how often to clean a humidifier.

Home › Guides › How Often to Clean & Cleaning by Brand

How Often to Clean a Humidifier — Plus Cleaning by Type and Brand

The honest schedule manufacturers and the EPA point to, broken down by type — with the specific quirks of cool mist models, Vicks vaporizers, Crane humidifiers, and ultrasonic units.

Ask ten humidifier owners how often to clean a humidifier and you'll get ten answers, most of them "when it looks dirty." The trouble is that by the time a humidifier looks dirty, bacteria and biofilm have been established for days. The schedule below follows manufacturer guidance and the EPA's long-standing advice on portable humidifiers: rinse daily, deep clean at least weekly during use, and disinfect regularly. It sounds like a lot written out; in practice it's two minutes a day and fifteen minutes a week.

The cleaning schedule at a glance

TaskHow oftenWhat it involves
Empty, rinse, refillDailyDump all old water, rinse tank and base, wipe dry, refill fresh
Dry-out dayWeeklyLeave tank empty and open for several hours so parts fully dry
Vinegar deep clean & descaleWeekly20–30 minute vinegar soak, gentle scrub, thorough rinse (method)
DisinfectEvery 2–4 weeksHydrogen peroxide or diluted bleach soak, full rinse
Check filter / wickWeeklyRinse; replace if stiff, stained, or still musty after cleaning
End-of-season cleanBefore storageFull deep clean + disinfect, 24 hours of drying before packing away

In hard-water homes, move descaling to the front of the weekly routine — scale is your fastest-growing problem. If anyone in the house has asthma, allergies, or a weakened immune system, or the humidifier runs in a nursery, lean toward disinfecting every two weeks rather than monthly. And whenever the unit has sat with water in it for more than a couple of days, treat it as overdue: deep clean and disinfect before the next run, whatever the calendar says. The full step-by-step for each task lives in our guide to how to clean a humidifier.

How to clean a cool mist humidifier

"Cool mist" covers most modern tabletop units, in two flavors. Evaporative models use a fan and wick filter; ultrasonic models use a vibrating disc (covered separately below). For evaporative cool mist units, the wick is the whole game: rinse it weekly, descale it monthly, and replace it the moment it stays musty after cleaning. The fan intake also gathers dust — wipe the grille weekly so the unit isn't blowing household dust across a wet filter. Otherwise the standard schedule applies: daily rinse, weekly vinegar soak of tank and base, monthly disinfect.

How to clean a Vicks humidifier

Vicks is best known for warm mist vaporizers and steam inhalers, and searches for "how to clean a Vicks humidifier" spike every cold season for one reason: mineral crust on the heating element. Warm mist units boil water, so minerals concentrate fast. Weekly, unplug the unit, let it cool completely, remove the removable parts, and soak the heating chamber area with undiluted white vinegar for 30 minutes, then brush the softened scale off the element and rinse well. Two Vicks-specific cautions: never immerse the motor housing or any part with electrical components, and if you use Vicks VapoSteam or menthol pads, clean the medicine cup and pad tray weekly too — residue builds up there and mutes the scent while feeding film. For cool mist Vicks models (like the filter-free cool mist line), follow the cool mist routine above and pay extra attention to the water channel in the base, where pink film likes to start.

How to clean a Crane humidifier

Crane's popular drop-shaped ultrasonic humidifiers — a nursery staple — have their own quirks, which is why "how to clean a Crane humidifier" is its own common search. The teardrop tank has narrow curves a bottle brush handles better than a sponge, and the small water basin in the base traps a puddle that owners often miss: tip the base and empty it fully every day, not just the tank. Weekly, soak tank and base with vinegar, and gently wipe the round ultrasonic transducer disc in the base with a vinegar-dampened soft cloth — scale on that disc is the usual cause when a Crane stops misting. Crane also sells demineralization filters for hard water; if you're getting white dust on nursery furniture, that filter (or switching to distilled water) is the fix, as explained in our descaling guide. Never put the base under running water — the fan and electronics live there.

Ultrasonic humidifiers, any brand

Ultrasonic units deserve special mention because they're the most efficient at aerosolizing everything in the tank — minerals become white dust, and bacteria become airborne most readily from these machines. That makes the daily rinse and weekly disinfect-adjacent routine genuinely important, and distilled water close to non-negotiable in hard-water homes. Wipe the transducer weekly with vinegar on a soft cloth, never scrape it, and empty the base's internal reservoir daily — many ultrasonic bases hold hidden water even when the tank looks empty.

The bottom line

Daily rinse, weekly vinegar, monthly disinfect, honest filters. That rhythm — whatever your brand — keeps a humidifier doing the one job it has: making your air more comfortable, not more contaminated. Not sure where your machine stands today? Run the Care Checker on our home page for a plan based on your type and its current condition.

Home › About

About Humidifier Cleaning Hub

Humidifier Cleaning Hub is a small, focused reference site about one unglamorous but important job: keeping home humidifiers clean. Humidifiers sit in millions of American bedrooms and nurseries, and most of them get cleaned far less often than their manufacturers recommend — not because owners are careless, but because the instructions are buried in manuals and the advice online is scattered and contradictory.

We built this site to fix that. Everything here is organized around the questions people actually ask: how to clean a humidifier step by step, what the pink film in the tank really is, how to descale mineral buildup, and how often each type of machine — cool mist, warm mist, ultrasonic, evaporative — genuinely needs attention, including brand-specific notes for Vicks and Crane models.

How we write our guides

Our cleaning routines follow the care guidance published by major humidifier manufacturers and the US Environmental Protection Agency's recommendations for portable humidifiers: daily rinsing, regular descaling, periodic disinfecting, and thorough drying. Where brands differ — a Vicks heating element, a Crane base reservoir — we say so, and we flag the things that should never go in a humidifier at all.

Humidifier Cleaning Hub is general educational information, not medical advice. If anyone in your household has a respiratory condition or a weakened immune system, follow your clinician's guidance and your manufacturer's manual above anything written here.

What this site is not

We don't sell humidifiers or cleaning products, and nothing here is a paid placement. The site is a static reference you can read start to finish in one sitting — start with the complete cleaning guide or run the Care Checker on the home page to get a plan for your own machine.

Questions or corrections? We genuinely want them — reach us through the contact page.

Home › Contact

Contact Us

Spotted an error, have a cleaning question we haven't covered, or want to suggest a brand or model we should write about? Email is the way.

The fastest way to reach Humidifier Cleaning Hub is by email:

hello@humidifierclean.pages.dev

What to write to us about

  • Corrections: if a guide gets a step, product note, or brand detail wrong, tell us and we'll fix it.
  • Guide requests: a humidifier type or cleaning problem we haven't covered yet — pink mold variants, a specific model's quirks, storage questions.
  • Your experience: what worked (or didn't) on your machine helps us keep the guides practical.

We read everything and reply to most messages within a few business days. Please don't send medical questions — we're a cleaning reference, not a clinic, and for health concerns your doctor or your humidifier's manufacturer is the right call.

Looking for something specific right now? The cleaning guide, pink mold guide, and descaling guide cover the questions we hear most.

Home › Privacy Policy

Privacy Policy

Last updated: November 13, 2026

This Privacy Policy explains what information Humidifier Cleaning Hub (humidifierclean.pages.dev) does and does not collect when you visit, and how cookies and advertising work on this site.

Information we collect

This is a static informational website. We do not operate user accounts, we do not run a contact form database, and we do not ask you to submit personal information to read any page. The Humidifier Care Checker on the home page runs entirely in your browser: your answers are processed on your device and are never transmitted to us or stored anywhere.

If you email us at hello@humidifierclean.pages.dev, we receive your email address and the contents of your message, and we use them only to reply to you.

Cookies and advertising

This site may display advertising served by third-party advertising partners, including Google AdSense. Third-party vendors, including Google, use cookies to serve ads based on a user's prior visits to this website or other websites. Google's use of advertising cookies enables it and its partners to serve ads to users based on their visit to this site and/or other sites on the internet.

You may opt out of personalized advertising by visiting Google's Ads Settings (adssettings.google.com). You can also opt out of some third-party vendors' use of cookies for personalized advertising at aboutads.info. Most browsers also let you block or delete cookies through their settings; doing so will not affect your ability to read this site.

Advertising partners may collect and use information such as your IP address, browser type, device information, and the pages you visit, in order to measure ad performance and, where you have not opted out, personalize ads. We do not sell personal information, and we do not receive the data those partners collect through their cookies.

Analytics

We may use privacy-respecting, aggregate analytics to understand which guides are read most so we can improve them. Aggregate analytics tell us things like page views and approximate region; they are not used to identify individual visitors.

External links

Pages on this site may link to manufacturer websites and other external resources. We are not responsible for the privacy practices or content of external sites; please review their policies if you visit them.

Children's privacy

This site is written for adult homeowners and is not directed at children under 13. We do not knowingly collect personal information from children.

Changes to this policy

If we change this policy, we will update this page and revise the date at the top. Continued use of the site after a change means you accept the updated policy.

Contact

Questions about this policy can be sent to hello@humidifierclean.pages.dev or through our contact page.